三葉羅茨鼓風機的外在結構應用

　　作為機械設備的一類，三葉羅茨鼓風機的機構相對復雜，作用也是非常強大的，下面給各位愛好機械研究的伙伴們簡單介紹一下吧。

　　As a kind of mechanical equipment, the three-leaf Roots blower mechanism is relatively complex, the role is also very powerful, the following is a brief introduction to the partners who like mechanical research.

　　三葉羅茨鼓風機安裝消聲器

　　一是為了降低羅茨離心通風機噪音的零件。

　　One is to reduce the noise of Roots centrifugal ventilator parts.

　　二是風機葉輪，這個跟羅茨離心式風機工作原理息息相關。

　　The second is the fan impeller, which is closely related to the working principle of Roots centrifugal fan.

　　三是輕質墻板，這一通常是起連接促進作用的。

　　The third is the lightweight wallboard, which usually plays a role in promoting the connection.

　　四是機殼，起到促進作用。

　　The fourth is the shell, which plays a catalytic role.

　　采用2個葉輪形狀轉子在氣缸所圍相對運動來變小運輸汽體轉動制冷機組。使用的較多的場所理應都是水喂養和水處理行業，還有就是低壓力場所氣體運輸。特點是在轉速一定條件下，流量基本上不會更改，具有穩定的工作特性。除此之外運作零部件中間有間隙的，因而工作上的時候要應用潤滑油脂，這樣才能保證運輸氣體全無油，符合環保標準。

　　The relative motion of two impeller-shaped rotors around the cylinder is used to turn the refrigeration unit with small transport steam. The more places used are supposed to be water feeding and water treatment, as well as gas transport in low-pressure places. The characteristic is that under certain conditions of rotating speed, the flow rate will not change basically, and it has stable working characteristics. In addition, there is a gap between the operating parts, so it is necessary to use lubricating grease when working, so as to ensure that the gas transport gas is completely oil-free and in line with environmental standards.

　　以上就是三葉羅茨鼓風機的一些簡單介紹，如此復雜的結構，產生巨大的動能，這股動能推動企業，社會，個人乃至國家的發展，大國創造，真誠可靠。